Instruction Manual 1T-CT-445, 1T-CT-454 and 1T-CT-458 Cat.5 Extenders
8 4.4 Special Instructions: 1T-CT-445 Transmitter & 1T-CT-454, 458 Receivers The following instructions apply to systems using DDC2B/EDID ca
9 5.1 Equalization and Gain Adjustments On all Receiver models, locate the EQ (Equalization) and GAIN adjustments on the side of the Receiver.
10 . If you want to nudge the blue image to the left, make sure the blue LED is blinking, then hold the nudge button in and wait until
11 7.0 LIMITED WARRANTY LIMITED WARRANTY – With the exceptions noted in the next paragraph, TV One warrants the original purchaser that the equi
12 9.0 CONTACT INFORMATION Should you have questions or require assistance with this product in areas not covered by this manual, please contact TV
Table of Contents 1.0 Introduction 2 2.0 Specifications 3 3.0 Checking Package Contents 4 4.0 Connecting The Hardware 5 5.0 Operating The Un
21.0 INTRODUCTION Thanks for purchasing this Cat.5 Extender Product from TV One. This Product line is designed to transport RGBHV and RS-232 signals
32.0 SPECIFICATIONS 2.1 General Environmental Operating Temperature 0° to +70° C (+32° to +158° F) Operating Humidity 10% to 90%, Non-condensing
42.2 Receivers UTP Inputs 1T-CT-454, 458 1x via RJ-45 Connector Video Outputs 1T-CT-454, 458 1x RGBHV via HD-15 RS-232 Output 1T-CT-454, 458 1
5 4.0 CONNECTING THE HARDWARE Please study the panel drawings below and become familiar with the signal input, outputs, power requirements/input
6 4.2 1T-CT-445 Transmitter 1. Connect the source device’s video output to the VIDEO IN connector of the Transmitter, usin
7 4.3 1T-CT-454 and 1T-CT-458 Receivers 1. Connect the Cat.5/5E or Cat.6 cable to the UTP IN connector of the Receiver. 2.
Commentaires sur ces manuels